Roles & Responsibilities
S. No.
Responsibility
1
Comply with safety rules and regulations. Be familiar with the fire equipment
in his area.
2
Familiar with plant P &IDs, SOPs, Work instructions, Operation and control
logics as well as the emergency operation procedures and any other related
documents.
3
Monitor all parameters of the unit and enter periodic readings on log sheets.
Summarize all activities/events that took place during his shift in the log
book.
4
Follow the instructions of the Shift Charge Engineer and Shift Supervisor and
coordinate
with other Operators in regard to all activities
5
Be alert and take quick actions during abnormal operating conditions.
6
Coordinate and ensure Lock Out & Tag Out during the isolation of equipment
for maintenance as per the approved Permit To Work procedure. Normalize the
equipment after cancellation when instructed to do so.
7
Inspect the unit and auxiliaries during the shift to make sure that all
equipment parameters are within limits. Report abnormalities to the Shift
Supervisor/ SCE.
8
Perform the periodic protection tests under the supervision of SCE/Supervisor
and maintain records. Perform equipment change over according to preset
schedules.
9
Raise work requests or defect notes for faulty equipment and follow up for the
defect rectification
10
Assist in the training and familiarization of new operators.
11
Report near misses and implement prescribed risk controls.
12
Report deviations in Quality, Health, Safety and Environmental Management
System.
13
Ensure proper waste disposal measures.
14
Perform other duties as assigned.
Title
CCR Operator
Job location (Department/Plant)
Operations
Reporting to
Shift Supervisor/Shift Charge Engineer
Required Skills
1. Generic awareness of Quality, Occupational Health & Safety and
Environment Management system principles
2. Knowledge of identification, classification and disposal of waste
3. Knowledge of Emission Monitoring
4. Knowledge of environmental and health impact of chemicals being used in
the plant
5. Knowledge of firefighting equipment
6. Knowledge of PPE and safety equipment
7. Knowledge of First aid measures
8. Should be well conversed with Power/Water plant operational activities.
9. Interpersonal communication skills.
10. Analytical skills.
11. Hazard Risk Assessment capability
12. Aspect Impact Assessment knowledge
13. Basic computer skills
Electrical or energy
**Minimum 5 years experience working in Thermal power plant, Steam turbine plus boiler expertise.** Monitor the Operation parameters of the system at local and coordinate with the CCR Operator in regard to all related activities that affect operation. Responsible for safe start up/shut down of the …
JOB PURPOSE: To monitor and control the operations and parameters of the power and water units through the plant's control room and maintain a steady state of operations of the units, to meet the required production targets, in accordance with NOMAC's work instructions and quality and HSSE standard…