Rigger 3

Duties and Responsibilities:

Pre-Trip:
‎1. Study proper route survey and coordinate with the person who conducted the
route survey.
‎2. Arrange and carry proper safety tools for the trip including PPE, Cones,
Flags, revolving lights, barricading tapes, safety reflective jacket, whistle,
etc.
‎3. Check lashing/tire, Spares, etc.
‎4. Check the power pack and report if there are any leakages.
‎5. Obtain information for bypasses.
‎6. Obtain proper information of road, route surveys ahead of the visit.
‎7. Obtain documentation of trip including T.P
‎8. Coordinate (if required) with SEC / Authorities electrical shutdown.

During Operations
‎1. Ensure the safety of the load.
‎2. Always remain behind of trailer
‎3. Give clearance to driver for passing under overhead bridge/gantries,
cables, etc.
‎4. Observe the driver while passing through narrow culverts, and up hills.
The escort should also make a pre-visit of culverts, up hills by stopping the
driver/load at a safe place.
‎5. Routinely check of lashing of cargo, tire pressure, visual Inspection of
Trailer
‎6. Operate Supervision / Steering hydraulics with the guidance of the driver
as & when required.
‎7. Hang ‎50% of axles during empty axle returning.
‎8. Escort vehicle must be driven with a revolving light. Truck/trailer and
over-dimensional cargo must be visible by installing revolving lights.

While Parked:
‎1. Check power pack leaking.
‎2. Ensure proper parking; put cons alongside parking area.
‎3. Ensure the safety of the load.
‎4. Check lashing, Tyres, spares, etc.

At site:
- To check and make sure the ground is firm/ and in order.
- Check proper ground compaction.
- Check if there are any obstacles.
- Turning radius – No. of turnings at the site.
- Make proper timber gripping and take confirmation from the supervisor.
- Assist your crew members and ensure full support to the supervisor.
- Routine Job Assignment in Terminal (while not on the trip):
- Assist in cleaning.
- Assist in keeping equipment clean.
- Assist in maintaining safety devices, fire extinguishers, etc.
- Assist in inspection of equipment as per checklist.
- Follow the instruction of the Terminal Supervisor.

- Location: Jubail Industrial