Control Room Operator - Thermal power / Steam Turbine - (Rabigh)

Roles & Responsibilities

S. No.

Responsibility

‎1

Comply with safety rules and regulations. Be familiar with the fire equipment
in his area.

‎2

Familiar with plant P &IDs, SOPs, Work instructions, Operation and control
logics as well as the emergency operation procedures and any other related
documents.

‎3

Monitor all parameters of the unit and enter periodic readings on log sheets.
Summarize all activities/events that took place during his shift in the log
book.

‎4

Follow the instructions of the Shift Charge Engineer and Shift Supervisor and
coordinate
with other Operators in regard to all activities

‎5

Be alert and take quick actions during abnormal operating conditions.

‎6

Coordinate and ensure Lock Out & Tag Out during the isolation of equipment
for maintenance as per the approved Permit To Work procedure. Normalize the
equipment after cancellation when instructed to do so.

‎7

Inspect the unit and auxiliaries during the shift to make sure that all
equipment parameters are within limits. Report abnormalities to the Shift
Supervisor/ SCE.

‎8

Perform the periodic protection tests under the supervision of SCE/Supervisor
and maintain records. Perform equipment change over according to preset
schedules.

‎9

Raise work requests or defect notes for faulty equipment and follow up for the
defect rectification

‎10

Assist in the training and familiarization of new operators.

‎11

Report near misses and implement prescribed risk controls.

‎12

Report deviations in Quality, Health, Safety and Environmental Management
System.

‎13

Ensure proper waste disposal measures.

‎14

Perform other duties as assigned.

Title

CCR Operator

Job location (Department/Plant)

Operations

Reporting to

Shift Supervisor/Shift Charge Engineer

Skills

Required Skills

‎1. Generic awareness of Quality, Occupational Health & Safety and
Environment Management system principles
‎2. Knowledge of identification, classification and disposal of waste
‎3. Knowledge of Emission Monitoring
‎4. Knowledge of environmental and health impact of chemicals being used in
the plant
‎5. Knowledge of firefighting equipment
‎6. Knowledge of PPE and safety equipment
‎7. Knowledge of First aid measures
‎8. Should be well conversed with Power/Water plant operational activities.
‎9. Interpersonal communication skills.
‎10. Analytical skills.
‎11. Hazard Risk Assessment capability
‎12. Aspect Impact Assessment knowledge
‎13. Basic computer skills

Education

Electrical or energy